Other Products
DESCRIPTION
Moist Metal Grip is a two-part epoxy coating system that has been specifically designed with specific additives to promote adhesion when used on metal. Moist Metal Grip was developed to be applied to metal surfaces that cannot be dry enough to use Rust Grip®. It can be used directly to wet or damp metal surfaces and maintain excellent adhesion to prevent further surface corrosion. It is a water repelling epoxy for use under water or in areas where constant splashing or condensation is a problem. It is resistant to chemicals and solvents, and is designed to be applied directly to concrete, masonry and wood.
- Prevents corrosion of coated materials from the damaging effects of submersion or constant moisture exposure
- Is applied to wet surfaces that cannot be dried before applying a corrosion coating
- Can be used on all metal, wood and concrete surfaces that are exposed to constant water pooling or condensation
- Used to encapsulate existing rusted surfaces
- Used to protect the inside of water tanks
- Applied over floors – it is tough enough to withstand traffic
- Used as a primer before Enamo Grip
| Product Chemistry | Epoxy based |
| Volume Solids | 51% |
| VOC Level | 158 g/L, 1.32 lbs./gal. |
| Dry Time (at 70˚F) | 30-60 minutes to tack free |
| Full Care | 10 Days |
- Can be applied directly to wet or condensed surfaces
- Submergible after 48 hours; finishes curing while submerged
- Flexible and durable in even extreme conditions
- Acid and chemical resistant
- Easy to apply as a semi-self-levelling formula
- Smooth finish that can be tinted in any color
- Can withstand temperatures up to 149°c
- Tested to 450 hours salt spray exposure
Moist Metal Grip can be applied to metal, as well as concrete or masonry substrates. The coating can be applied by spray, brush or roller. For specific instructions on surface preparation, mixing and application, please refer to the SPI’s application instructions for Moist Metal Grip.